2-8 PERIODIC MAINTENANCE
SPARK PLUG INSTALLATION
• Tighten the spark plug to the specified torque.
Spark plug: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
SPARK ARRESTER
• Extract the spark arrester 1 from the muffler.
• Clean the spark arrester 1 by brush.
• Reinstall the spark arrester 1.
FUEL LINE
Inspect the fuel hose for damage and fuel leakage. If any
defects are found, replace it with a new one.
• When replacing the fuel hose, remove the left frame cover.
(5-4)
To avoid damaging the cylinder head threads; first,
tighten the spark plug by hand and then tighten it to
the specified torque using the spark plug wrench.
Clean every 3 months.
Inspect every 3 months.
Replace every 4 years.
PartShark.com
877-999-5686
To Next Page
Loading...
