Suzuki LT-Z50 - Reassembly and Remounting

5-14 CHASSIS
REASSEMBLY AND REMOUNTING
BEARING
• Apply SUZUKI SUPER GREASE “A” to the bearing before
installing.
 99000-25010: SUZUKI SUPER GREASE “A” or equivalent
• Install the wheel hub inner bearing with the special tool.
 09913-70210: Bearing installer set

• Install the wheel hub outer bearing with the special tool.
 09924-84521: Bearing installer set
A: Clearance
• Apply 3 grams of grease to the each dust seal lip before
installing it.
• Install the dust seals with the special tool.
 09913-70210: Bearing installer set
 99000-25161: WATER RESISTANCE GREASE or equiv-
alent
* First install the wheel hub inner bearing, then install
the spacer and outer bearing.
* The sealed cover of the bearing must face outside.
Outside Inside
PartShark.com
877-999-5686