CHASSIS 5-15
• Apply SUZUKI SUPER GREASE “A” to the camshaft.
99000-25010: SUZUKI SUPER GREASE “A” or equivalent
• Align the punched mark A of the brake cam lever with the slit
B of the front brake camshaft.
• Apply SUZUKI SUPER GREASE “A” to the front brake cam-
shaft and pin, and install the brake shoes.
99000-25010: SUZUKI SUPER GREASE “A” or equivalent
• Install the front wheel hub and spring.
• Tighten front brake cam lever nut to the specified torque.
Front brake cam lever nut: 3.3 N·m (0.33 kgf·m, 2.5 Ib-ft)
• Tighten the front hub nut 3 to the specified torque.
Front hub nut: 65 N·m (6.5 kgf·m, 47.0 Ib-ft)
• Install the new cotter pin to the nut.
• Install the front wheel. (5-8)
• After installing the front brake, adjust the following item.
Front brake lever play. (2-17)
Be careful not to apply too much grease to the cam
and pin. If grease gets on the lining, brake slippage
will result.
PartShark.com
877-999-5686
To Next Page
Loading...
