CHASSIS 5-33
DUST SEAL
• Remove the dust seals with the special tool.
09913-50121: Oil seal remover
BEARING
Inspect the play A of the rear axle housing bearings by finger
while they are in the rear axle housing. Rotate the inner race by
finger to inspect it for abnormal noise and smooth rotation. If
there is anything unusual, replace the bearing with a new one.
• Remove the rear axle housing bearings with the special tool.
09921-20240: Bearing remover set
• Remove the spacer 1.
REASSEMBLY AND REMOUNTING
Reassemble and remount the rear brake and rear axle housing
in the reverse order of removal and disassembly.
Pay attention to the following points:
BEARING AND REAR AXLE HOUSING
• Apply SUZUKI SUPER GREASE “A” to the rear axle housing
bearings and the lip of the dust seals before installing them.
99000-25010: SUZUKI SUPER GRESE “A” or equivalent
The removed dust seals must be replaced with new
ones.
The removed bearings should be replaced with new
ones.
PartShark.com
877-999-5686
To Next Page
Loading...
