Suzuki LT-Z50 - Page 147

5-34 CHASSIS
• Install the rear axle housing bearing with the special tool.
• Install the dust seals with the special tool.
 09924-84510: Bearing installer set

• Tighten the rear axle housing bolts to the specified torque.
 Rear axle housing bolt: 50 N·m (5.0 kgf-m, 36.0 lb-ft)
REAR BRAKE
• Apply SUZUKI SUPER GREASE “A” to the rear brake cam-
shaft and new O-rings.

99000-25010: SUZUKI SUPER GREASE “A” or equivalent
• Install the new O-rings into the brake camshaft hole.
* First install the left bearing 1, then install the spacer
2 and right bearing 3.
* The sealed cover of the bearing must face outside.
Left
Right
Left
Right
Clearance
PartShark.com
877-999-5686