3-6 ENGINE
ENGINE INSTALLATION
Install the engine in the reverse order of engine removal. Pay attention to the following points:
• Tighten the engine mounting nuts to the specified torque.
Engine mounting nut: 31 N·m (3.1 kgf-m, 22.5 lb-ft)
LH RH
RH
LH
1 Engine mounting bolt (25 mm) 4 Engine mounting bolt (40 mm)
2 Engine mounting bolt (30 mm) A Engine mounting nut ITEM N·m
kgf-m
lb-ft
3 Engine mounting bolt (35 mm) A 31 3.1 22.5
The engine mounting nuts are self-locking. Once the
nuts have been removed, they are no longer of use.
PartShark.com
877-999-5686
To Next Page
Loading...
