5-8 CHASSIS
TIRES
TIRE REPLACEMENT
• Remove the front and rear wheels. (5-8)
• After removing the air valve caps, release the tire pressure by
depressing the valves.
• Dismount the bead from the rim completely as shown.
• Separate the tire from the rim using a set of tire levers and rim
protectors.
• Apply tire lubricant to the tire bead and the flange of the rim.
• Mount the tire on the rim by hand as shown.
NOTE:
Inspect the sealing portion of the rim before installing the tire on
the rim.
When using the tire levers, do not scratch or hit the
sealing portion (hump) of the wheel or it may cause
air-leakage.
Never apply grease, oil, or gasoline to the tire bead
because they will deteriorate the tire.
The standard tire fitted on this vehicle is AT16 × 8-7✩
for the front and rear.
The use of tires other than the standard may cause
instability. It is highly recommended to use the speci-
fied tire.
PartShark.com
877-999-5686
To Next Page
Loading...
