CHASSIS 5-13
DUST SEAL
• Remove the each dust seal with the special tool.
09913-50121: Oil seal remover
BEARING
Inspect the play A of the wheel hub bearings by finger while
they are in the wheel hub. Rotate the inner race by finger to
inspect it for abnormal noise and smooth rotation. If there is any-
thing unusual, replace the bearing with a new one.
• Remove the wheel hub inner bearing with the special tool.
09941-50111: Bearing remover
• Remove the spacer 1.
• Remove the wheel hub outer bearing with the special tool.
09941-50111: Bearing remover
The removed dust seal must be replaced with a new
one.
The removed bearing should be replaced with a new
one.
The removed bearing should be replaced with a new
one.
PartShark.com
877-999-5686
To Next Page
Loading...
