FUEL SYSTEM 4-13
GASKET
• Install the gasket 1.
PISTON VALVE AND SPRING
• Install the piston valve 1 and spring 2 to the throttle cable.
CARBURETOR
• Apply SUZUKI SUPER GREASE “A” to the O-ring 1.
99000-25010: SUZUKI SUPER GREASE “A” or equivalent
• Install the piston valve 2 to the carburetor.
• Install the intake pipe clamp 3. (7-18)
• Tighten the carburetor mounting bolts to the specified torque.
Carburetor mounting bolt: 6 N·m (0.6 kgf-m, 4.5 lb-ft)
The gasket must be replaced with a new one.
The O-ring must be replaced with a new one.
Align the slit A of the piston valve 2 with the projec-
tion B on the carburetor body.
PartShark.com
877-999-5686
To Next Page
Loading...
