Suzuki LT-Z50 - Page 133

5-20 CHASSIS
• Remove the cotter pin and steering shaft lower nut 1 and O-
ring.
• Remove the cotter pins and tie-rod end nuts 2.

• Remove the tie-rods.
• Remove the handlebar clamp bolts.
• Remove the cotter pins.

• Remove the steering shaft holder and steering shaft.
* The removed cotter pins must be replaced with new
ones.
* The removed O-ring must be replaced with a new
one.
The removed cotter pins must be replaced with new
ones.
PartShark.com
877-999-5686