Suzuki LT-Z50 - Page 51

3-10 ENGINE
• Remove the push rods 2.
• Remove the gasket 3 and dowel pins 4.
STARTER MOTOR
• Remove the starter motor 1.
GENERATOR
• Remove the generator rotor nut with the special tool.
 09930-40113: Rotor holder

• Remove the generator rotor 1 with the special tool and
removed nut 2.
 09920-13120: Crankshaft separator
• Remove the generator rotor 1 and nut 2.
• Remove the key 3.
• Remove the generator coil 4 and pick-up coil 5.
Be careful not to damage the generator coil by the
special tool.
PartShark.com
877-999-5686