3-12 ENGINE
• Remove the movable drive spacer 7 together with the power
reduction spacer 8 and movable drive face assembly 9.
NOTE:
Movable drive face disassembly. (3-36)
• Remove the washer 0.
MOVABLE DRIVEN
• Remove the clutch housing 1 with the special tool.
09930-40113: Rotor holder
• Remove the clutch shoe/movable driven face assembly 2
together with the drive belt 3.
NOTE:
Clutch shoe/movable driven face disassembly. (3-37)
CVT CASE
• Remove the CVT case 1.
NOTE:
Loosen the CVT case bolts little by little and diagonally.
PartShark.com
877-999-5686
To Next Page
Loading...
