ENGINE 3-25
CRANKSHAFT BEARING INSPECTION
Inspect the outer race play and smooth rotation of the bearing by
hand while it is on the crankshaft.
If any abnormality is found, replace the bearing with a new one.
NOTE:
If there is no abnormal noise, the bearing removal is not neces-
sary.
CRANKSHAFT BEARING REMOVAL
• Remove the crankshaft bearing and cam drive gear with the
suitable tool as shown in the photograph.
Play
Play
Remove the cam drive gear 1 together with the right
crankshaft bearing. The cam drive gear 1 is the cam
timing gear. Because extreme accuracy is required
when press-fitting it, replacing the crankshaft assem-
bly is recommended.
PartShark.com
877-999-5686
To Next Page
Loading...
