3-42 ENGINE
• Install the pins 6 to the pin hole with the rollers 7 fitted.
• Install the movable driven face spring seat 8 to the movable
driven face 5 securely.
• Install the spring 9 and clutch shoe assembly 0 onto the
movable driven face 5.
• Compress the spring 9 with the special tool.
09922-31420: Clutch spring compressor
• Tighten the clutch shoe nut temporarily.
• Remove the special tool from the clutch shoe assembly.
• Tighten the clutch shoe nut to the specified torque with the
special tool.
09930-40113: Rotor holder
Clutch shoe nut: 60 N·m (6.0 kgf-m, 43.5 lb-ft)
Align the flats A of the fixed driven face end and
clutch shoe plate.
PartShark.com
877-999-5686
To Next Page
Loading...
