Table 11-5
Steps for replacing an appliance after it has been rendered
non-operational but the attached disk storage is still operational
(continued)
DescriptionActionSteps
Turn on the components in
the following order:
■ Turn on the storage shelf
that is the furthest away
from the appliance and
wait until the initialization
completes.
■ Turn on the storage shelf
that is nearest to the
appliance and wait until
the initialization
completes.
■ Turn on the main
appliance.
Note: If your environment
contains multiple appliances,
recover the master server
appliance first, then the media
server second.
Turn on the components.Step 3
125Disaster Recovery
Disaster recovery scenarios
To Next Page
Loading...
