Table 11-5
Steps for replacing an appliance after it has been rendered
non-operational but the attached disk storage is still operational
(continued)
DescriptionActionSteps
Perform a reconfiguration of
the new appliance. The
reconfiguration process
determines whether
NetBackup storage objects
have been detected. You
have the option of preserving
the following:
■ NetBackup catalog.
■ Pre-existing storage
partitions and objects.
Refer to the following topics
for steps to reconfigure your
appliance:
■ See “Reimaging a
NetBackup appliance from
the USB drive”
on page 127.
■ See “Reconfiguring a 52xx
master server appliance
from the USB drive using
the NetBackup Appliance
Shell Menu” on page 135.
■ See “Configuring a master
server to communicate
with an appliance media
server” on page 141.
■ See “Reconfiguring a 52xx
media server appliance
from the USB drive using
the NetBackup Appliance
Shell Menu” on page 143.
Note: If you want to add an
additional storage expansion
shelf to your configuration,
you can add it after the
reconfiguration process is
complete.
Reconfigure the new
appliance with the existing
storage disk systems.
Step 4
126Disaster Recovery
Disaster recovery scenarios
To Next Page
Loading...
