To configure a master server to communicate with a new media server
1
Log in to the master server as the administrator and make sure the name of
the media server appliance is added to the master server:
From the NetBackup Appliance Web Console:
■ Click Manage > Additional Servers > Add.
■ In the Appliance Hostname field, enter the fully
qualified host name (FQHN) of the appliance media
server that you want to add.
■ Click Add.
If the appliance has more than one host name, you
must add all of the names.
From the NetBackup Appliance Shell Menu:
■ From the Main_Menu > Settings view, run the
following command:
Settings > NetBackup AdditionalServers
Add media-server
Where media-server is the fully qualified host name
(FQHN) of the appliance media server that is not yet
configured.
If the appliance has more than one host name, you
must add all of the names.
For an appliance master
server:
142Disaster Recovery
Disaster recovery scenarios
To Next Page
Loading...
