Table 12-4
Monitor > SCSP (continued)
Recommended actionExplanationError messages or Error type
Please use any of the following methods to fix
this error:
■ Refresh GUI couple of times, verify using
the NetBackup Appliance Shell Menu.
■ Stop and restart the web server. Revisit
the Monitor > SCSP tab.
If you are not connected to the
SCSP server and you cannot
see the logs.
There are no audit logs to display.
Please use any of the following methods to fix
this error:
■ Check your Internet connection.
■ Check SymHelp for additional information
about SCSP
This error can occur if your
Internet connection is down.
The SCSP documentation link does
not provide the required information.
Please use any of the following methods to fix
this error:
■ Establish the connection to your SCSP
server.
■ Set the retention period that is lesser than
the default retention period of 30 days.
This error is displayed when
the SCSP server is not
connected and the retention
settings are set to default.
Logs are filling up the storage space
on your appliance.
Please use any of the following methods to fix
this error:
■ Ensure that the SCSP server is in the same
network as the appliance.
■ Ensure that the SCSP server or host name
or IP address are correct.
■ Download a local copy of the authentication
certificate and use it to authenticate the
SCSP server.
■ Replace the existing certificate with a valid
authentication certificate for the SCSP
server.
This error is displayed when:
■ The SCSP server should
be in the same network as
the appliance.
■ The SCSP server or host
name or IP address are
incorrect.
■ The authentication
certificate for the SCSP
server cannot be found.
■ The authentication
certificate for the SCSP
server is corrupted.
The connection to the SCSP server
could not be established.
There is no action recommended for this
situation.
This error is displayed if you
are connected to SCSP
server, then the audit logs are
managed by SCSP server and
retention settings are not
applicable.
Retention button is disabled
174NetBackup Appliance error messages
Error messages displayed on the NetBackup Appliance Web Console
To Next Page
Loading...
