Table 12-3
Monitor > Hardware (continued)
Recommended actionExplanationError messages
You may want to call Symantec Technical
Support for assistance in resolving this error.
This message is displayed
when the partition information
cannot be retrieved from the
Call Home server.
Partition information is not available.
You may want to call Symantec Technical
Support for assistance in resolving this error.
This message is displayed
when the information for the
RAID groups cannot be
retrieved from the Call Home
server.
No RAID groups were detected.
You may want to call Symantec Technical
Support for assistance in resolving this error.
This message is displayed
when the temperature
information cannot be
retrieved from the Call Home
server.
Temperature information is not
available.
Table 12-4 lists all the error messages, displayed on the Monitor > SCSP tab.
Table 12-4
Monitor > SCSP
Recommended actionExplanationError messages or Error type
Please check your Internet connection, verify
the used path to download the certificate, and
try again.
The provided SSL certificate
for the SCSP server cannot
be found and downloaded.
Certificate download failed.
Please verify that the port number, entered for
the SCSP server is correct.
The provided SCSP server
port details are incorrect.
Please enter a valid port
To view the SCSP logs, log onto the SCSP
server and check the logs.
The SCSP logs cannot be
displayed on the NetBackup
Appliance Web Console. This
error is displayed when:
■ If you are connected to the
SCSP server and the audit
logs are currently being
pushed to SCSP server.
■ If the logs are not available
locally.
There are no audit logs to display.
173NetBackup Appliance error messages
Error messages displayed on the NetBackup Appliance Web Console
To Next Page
Loading...
