Symantec NetBackup 5220 - Page 186

Table 12-15
Settings > Authentication (continued)
Recommended actionExplanationError messages
Enter a valid user name to configure the
LDAP server.
The user name of an existing
LDAP user, provided to access
the LDAP server, is incorrect.
Error while setting common user
name.
Enter a valid group name to configure the
LDAP server.
The group name of an existing
LDAP group, provided to access
the LDAP server, is incorrect.
Error while setting common group
name.
Please use either of the following actions to
resolve the error:
■ Please ensure that the SSL certificate is
not corrupt.
■ Please ensure the path to the SSL
certificate is correct.
■ Please ensure that the SSL certificate is
up-to-date.
This error can be displayed due
to the following reasons:
■ The SSL certificate has got
corrupted.
■ The path to the SSL
certificate is incorrect.
■ The SSL certificate is
outdated.
Error while setting SSL.
Please refresh the page and if the problem
persists contact Symantec Technical
Support.
This error can be displayed due
to the following reasons:
■ The path to save the
generated XML file is
incorrect.
■ The XML file could not be
generated.
Error in exporting the LDAP
configuration settings.
Please ensure that you have the appropriate
permissions to perform the task. Please
refresh the page and try again. If the problem
persists contact Symantec Technical
Support.
The appliance cannot save the
newly added user.
Error in saving user.
Please ensure that you have the appropriate
permissions to perform the task. Please
refresh the page and try again. If the problem
persists contact Symantec Technical
Support.
The appliance cannot save the
newly added user group.
Error in saving group.
Please ensure that you have the appropriate
permissions to perform the task. Please
refresh the page and try again. If the problem
persists contact Symantec Technical
Support.
The appliance cannot grant
administrative permissions to
the selected user.
Error in authorizing.
186NetBackup Appliance error messages
Error messages displayed on the NetBackup Appliance Web Console