Symantec NetBackup 5220 - Page 187

Table 12-15
Settings > Authentication (continued)
Recommended actionExplanationError messages
Please ensure that you have the appropriate
permissions to perform the task. Please
refresh the page and try again. If the problem
persists contact Symantec Technical
Support.
The appliance cannot revoke
administrative permissions to
the selected user.
Error in unauthorizing.
Please ensure that you have the appropriate
permissions to perform the task. Please
refresh the page and try again. If the problem
persists contact Symantec Technical
Support.
The appliance cannot delete the
added user.
Error in deleting user.
Please ensure that you have the appropriate
permissions to perform the task. Please
refresh the page and try again. If the problem
persists contact Symantec Technical
Support.
The appliance cannot delete the
added user group.
Error in deleting user group.
In the case, an LDAP user that is configured
to use the Appliance need to be deleted or
removed from the LDAP directory, then the
user needs to be first removed from the
appliance. Otherwise, we will not be able to
remove that user from the appliance user
list.
If the user is removed from the
LDAP directory (and not
removed from appliance allowed
to log in list), though the user is
listed as LDAP authorized user,
the user will not be able to log
in. So, these users poses no
security threat.
Login failure due to an unrecognized
or invalid user
Please refresh the page and if the problem
persists contact Symantec Technical
Support.
This error can appear due to
multiple reasons. Please view
the complete error message to
obtain the resolution.
The server configuration is
unsuccessful. View error messages
for more information.
Table 12-16 lists all the error messages, displayed on the Settings > Password
tab.
187NetBackup Appliance error messages
Error messages displayed on the NetBackup Appliance Web Console