Symbol MC50 - Accessories; MC50 Demo Application; Getting Started

MC50 Integrator Guide1-4
Accessories
The following accessories are available:
MC50 Demo Application
The MC50 includes sample and demo applications to assist in application development.
To access the MC50 Demo, tap Start - MC50 Demo. See the Symbol Application Guide, p/n 72-65258-xx for information on using
Symbol applications.
Getting Started
Before using the mobile computer for the first time:
• install the main battery
• charge the main battery and backup battery
• start the mobile computer
• configure the mobile computer.
Charge the main battery before or after it is installed. Use one of the spare battery chargers to charge the main battery (out of the
mobile computer), or one of the cradles to charge the main battery installed in the mobile computer.
Table 1-1. MC50 Accessories
Accessory Description
Single Slot USB Cradle Charges the mobile computer main battery and a spare battery, and synchronizes the mobile computer with
a host computer through a USB connection.
Four Slot USB Cradle Charges up to four mobile computers, and synchronizes the mobile computer with a host computer through
a USB connection.
Four Slot Ethernet Cradle Charges up to four mobile computers, synchronizes the mobile computer with a host computer through an
Ethernet connection, and networks the mobile computer via an Ethernet hub.
Four Slot Spare Battery Charger Charges up to four mobile computer spare batteries.
Magnetic Stripe Reader (MSR) Snaps on to the mobile computer and adds magstripe reading capabilities.
Rigid Carrying Case Provides added protection for the mobile computer.
Headset For audio playback in noisy environments.
Cable Adapter Module (CAM) Snap-on required to connect the following cables to the mobile computer:
AC line cord (country-specific) and power supply Used with the CAM to charge the mobile computer.
Auto charge cable Used with the CAM to charge the mobile computer using a vehicle’s power port.
USB cable Used with the CAM to add USB communication capabilities.
Universal Battery Charger Adapter Adapts the UBC for use with MC50 batteries.
Symbol Mobility Developer Kit for eMbedded Visual
C++ v4.0 (SMDK for eVC4)
A development tool used to create native C and C++ applications for all Symbol mobile computers running
the Microsoft Windows Mobile 2003 Software for Pocket PCs operating system.
Available at http://www.symbol.com/MC50.
Device Configuration Package (DCP) for MC50 A development tool used to create and download hex images that represent flash partitions to the mobile
computer. Available at http://www.symbol.com/mc50.