Accessories 2-15
Ethernet Cradle Drivers
Install the Ethernet Cradle Drivers to enable the MC50 device to use the Four Slot Ethernet cradle.
Installing the Ethernet Cradle Drivers
Install the drivers in one of two ways:
• Download driver files to the mobile computer’s Platform folder.
• Copy a .CAB file to the mobile computer and launch the file.
To install the drivers via downloading individual files:
1. Download the Ethernet Cradle Drivers files from the Symbol website, http://devzone.symbol.com, to the host computer:
a. On http://devzone.symbol.com, select Developer Downloads and sign in.
b. Select PocketPC/WinCE/CE.Net Platform.
c. Select MC50 (Windows Mobile 2003 for Pocket PC).
d. Select Ethernet Cradle Drivers for MC50w vx.x, then download the .zip file to the development computer.
2. Unzip the file. Copy the files from the installation Platform folder to the mobile computer’s Platform folder. See Downloading
Files Using ActiveSync on page 5-3.
3. Perform a hard reset.
To install the drivers via the .CAB file:
1. Download the Ethernet Cradle Drivers files from the Symbol website, http://devzone.symbol.com, to the host computer (see
the previous instructions).
2. Copy the file USBOTG.MC50.CAB to the mobile computer. See Downloading Files Using ActiveSync on page 5-3.
3. On the mobile computer, navigate to the USBOTG.MC50.CAB file and double-tap the file.
4. When the .CAB file installation completes, soft reset the mobile computer.
To Next Page
Loading...
