Symbol MC50 - Configuring the AirBEAM Smart Client

MC50 Integrator Guide9-4
Configuring the AirBEAM Smart Client
1. Tap Start - Programs - AirBEAM Client. The AirBEAM Smart window appears.
2. Tap File - Configure. The AirBEAM configuration window appears.
Figure 9-1. AirBEAM Configuration Window
Use the configuration window to view and edit AirBEAM Smart Client configurations. This dialog box has six tabs: Packages(1),
Packages(2), Server, Misc(1), Misc(2) and Misc(3).
Packages(1) Tab
Use this tab to specify the package name of the first four of eight packages to load during the AirBEAM
synchronization process. The specified package name must correspond to a package available on the specified
package server.
Do not enter inadvertent trailing spaces on the Packages(1) tab. Information entered in these fields are case
and space sensitive.
Field Description
Package 1 Package name of the first of eight packages. This is an optional field.
Package 2 Package name of the second of eight packages. This is an optional field.
Package 3 Package name of the third of eight packages. This is an optional field.
Package 4 Package name of the fourth of eight packages. This is an optional field.