Accessories 2-9
UConnect
UConnect software enables automatic synchronization of every mobile computer inserted in the Four-Slot USB cradle.
Installing UConnect
Install UConnect in one of two ways:
• Download individual UConnect files to the Application partition of the mobile computer.
• Copy a .CAB file to the mobile computer and launch the file.
To install UConnect via downloading individual files:
1. Download the UConnect files from the Symbol website, http://devzone.symbol.com, to the host computer.
a. On http://devzone.symbol.com, select Developer Downloads and sign in.
b. Select PocketPC/WinCE/CE.Net Platform.
c. Select MC50 (Windows Mobile 2003 for Pocket PC.
d. Select Four-Slot USB Cradle Drivers for MC50w vx.x, then download the .zip file to the development computer.
2. Unzip the file. Copy the files to the Application partition of the mobile computer. See Chapter 6, Creating and Loading Hex
Images.
3. Perform a hard reset.
The Connect.reg file contains information on customizing UConnect's startup settings.
To install UConnect via the .CAB file:
1. Download the UConnect .CAB file from the Symbol website, http://devzone.symbol.com, to the host computer.
2. Copy the file from the host computer to the mobile computer. See Downloading Files Using ActiveSync on page 5-3.
3. On the mobile computer, navigate to the .CAB file and double-tap the file.
4. Follow the screen prompts to install.
With this method, the .CAB file does not install the .cpy and .reg files.
Once installed, UConnect launches automatically upon mobile computer startup. Each mobile computer must first form an ActiveSync
partnership with a host computer for UConnect to successfully manage synchronization.
Configuring UConnect
To customize default settings for UConnect, create a .reg file that overrides UConnect’s initial default settings. Refer to UConnect.reg,
included with UConnect, for information on setting custom hard reset and default settings.
To customize UConnect temporarily (until the next hard reset):
To Next Page
Loading...
