90 XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
1
where:
For example, enter:
F69<CR>
XLi gives one of the following responses:
F69 GPS <CR><LF>
F69 UTC <CR><LF>
F69 LOCAL <CR><LF>
F69 STANDARD <CR><LF>
To set the time mode, enter a command using the following format:
F69<S><TT><CR>
where:
For example, to change the time mode to local time, enter:
F69 LOCAL<CR>
Or, to change the time mode to UTC, enter:
F69 UTC<CR>
XLi responds to these changes with:
OK<CR><LF>
F = ASCII character F.
69 = Function number.
<SEP> = One or more separator characters, either space comma or tab characters. For output strings this
will be a single space character.
<TT> = Time Type. Either GPS, UTC, LOCAL, or STANDARD.
<CR> = Carriage return character.
<LF> = Line feed character.
F = ASCII character F.
69 = Function number.
<S> = ASCII space character.
<TT> = Time Type. Either GPS, UTC, LOCAL, or STANDARD.
<CR> = carriage return character.
<LF> = line feed character.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com