XLi Time & Frequency System 165
XLi-man, Issue 8, 6/17/2008, Rev. H
2
5
1
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
F128 – Have Quick Output Configuration
The Have Quick Out time code status can be determined via the Serial or Network port using Function
F128. Use Serial/Network Function F128 to obtain information about the current version of the software
installed on the Have Quick Out option board. To obtain the Have Quick Out option board status
information, send the following string to the Serial/Network port:
F128<SP>B<N><SEP>S<CR><LF>
where:
F = ASCII character F.
128 = function number.
<SP> = ASCII space character one or more.
B = ASCII character to denote Option Bay number follows
<N> = Option Bay Number, 1 through 10.
S = ASCII character for “Status Request”
<LT> = line terminator; for output strings (a carriage return and line feed ) or for input strings
(a carriage return only).
The XLi Serial/Network port will respond with a four-line replay for status request similar to the following
example:
Sample request: F128 B2 S<CR><LF>
Response: F128 B2: <CR><LF>
HQ OUT PART NUMBER 87-8016-6<CR><LF>
SOFTWARE 230-01510-10v1.2<CR><LF>
FPGA 230-01510-09v01<CR><LF
To obtain the Have Quick Out option board TFOM output format information, send the following string to
the Serial/Network port:
F128<SP>B<N><SEP>TFOM<CR><LF>
where:
F = ASCII character F.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
