XLi Time & Frequency System 221
XLi-man, Issue 8, 6/17/2008, Rev. H
2
5
1
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
Enhanced Low Phase Noise Module (87-8040)
This option provides four Low Noise 10MHz frequency output signals with the capacity to install two
cards into one XLi chassis. The option is only available with the optional OCXO, High Stab OCXO,
Rubidium, and High Stability Rubidium oscillators.
Signal Type: Analog sine wave
Synchronization: Frequency locked to the XLi's internal 10 MHz oscillator
Amplitude: +13 dBm ±1.5 dBm, into
50 Ω
Qty: four
Connector: BNC female
Physical: Double high option bay
CPU-Aware: No
Harmonic distortion: -50 dBc 2nd Harmonic
Spurious: -80 dBc
Isolation: -60 dBc
Phase Noise: -98 dBc/Hz @ 1 Hz offset
-127 dBc/Hz @ 10 Hz offset
-145 dBc/Hz @ 100 Hz offset
-150 dBc/Hz @ 1 kHz offset
-153 dBc/Hz @ 10 kHz offset
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
