178 XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
1
they are automatically enabled upon power-up. No additional hardware or software configuration or set
up is required.
Specifications
1 MHz or MPPS Output:
5 MHz or MPPS Output:
10 MHz or MPPS Output:
Sine Amplitude 1 VRMS into 50 Ω
Sine Harmonic Distortion -30 dBc
Square Wave TTL into 50 Ω
Synchronization Phase locked to the XLi's internal 10 MHz oscillator
Connector Female BNC
CPU-Aware No
Sine Amplitude 1 VRMS into 50 Ω
Sine Harmonic Distortion -30 dBc
Square Wave TTL into 50 Ω
Synchronization Phase locked to the XLi's internal 10 MHz oscillator
Connector Female BNC
CPU-Aware No
Sine Amplitude 1 VRMS into 50 Ω
Sine Harmonic Distortion -30 dBc
Square Wave TTL into 50 Ω
Synchronization Phase locked to the XLi's internal 10 MHz oscillator
Connector Female BNC
CPU-Aware No
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
