28 XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
1
been upgraded may have “casey” as the password. Settings are “operator1” through “operator10”
for the user names, and “casey” for the passwords. Also “user1” through “user10” for the user
names, and “ttm” for the passwords.
5. Click the Login button with your mouse.
Note: Keep track of the user name and password. There is no command to reset the user name and
password to the factory default settings.
For more information, see “Web Interface” on page 40.
Installing or Removing Option Cards
Warning: Installing and removing option cards can expose dangerous voltages that can cause
electric shock resulting in injury or death. Disconnect all power before installing or
removing option cards. Dangerous voltages may be present in option cards and in the
unit even when the power is disconnected.
To install an option card:
1. Set the unit up on a clean, safe, stable work surface that provides good visibility and maneuverabil-
ity to work with screwdriver.
2. On the back panel, select an option bay and unscrew the retaining screws and remove the small
aluminum panel from the option bay.
3. Line up the edges of the card with the guide grooves in the option bay and slide it in.
4. When the card is in almost all the way, push it firmly the rest of the way in until the faceplate of the
option card is flush with the back panel.
5. Insert and tighten the retaining screws so the option card is secured in place.
To remove an option card, remove the screws, pull the card out, and secure the small aluminum panel in
its place with the screws.
Additional Configuration
This section:
• Provides the factory settings of several XLi configurations
• Identifies which functions can be used to change those settings, and a cross-reference to the
corresponding page in this manual.
• Provides instructions for changing the settings, if needed.
Note: Unless specified, the settings remain the same as those in the Standard XLi.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
