62 XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
1
where:
For example, to display the time error, enter:
F13<CR>
XLi responds (example):
F13 TIME ERROR -0.002932863<CR><LF>
F18 – Software Version Request
Use function F18 to display the current firmware version numbers of the firmware in the XLi:
• Bootloader
• Software (firmware)
• File System
•Project Rev #
•FPGA
Command Line
Use Command Line Function F18 to obtain the system’s firmware version information.For example,
enter:
F18<CR>
The XLi responds:
F18 BOOTLOADER 192-8000
SOFTWARE 192-8001
FILE SYSTEM 192-8002v1.80
PROJ REV # 2-1
FPGA # 184-8000V50
Note: The values will be different from this example representing the current values.
F13 = ASCII string for function F13
<S> = ASCII space character
<ERROR> = calculated worst-case error in seconds
<CR> = carriage return character
<LF> = line feed
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com