2 XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
1
• RS-232/422 Serial I/O Port
• Vacuum florescent display, 19-button keypad
• 90-264 VAC
In addition, the XLi’s standard features can be expanded with the following optional configurations:
• GPS C/A Receiver References
• Programmable Pulse Output (PPO)
• Network Time Server (NTP)
• Multicode Output Card
• N.1 / N.8 Frequency Synthesizer
• Low Phase Noise 5 MHz Output Card
• Low Phase Noise 10MHz Output Card
• Enhanced Low Phase Noise Module
• T1/E1 Output Card
• Second Serial Talker or T1/E1 Rate Generator
• 1, 5, 10 MHz Sine/MPPS Square Output Card
• Have Quick Input/1 PPS Sync Reference Card
• Have Quick with TFOM Output Card
• PTTI BCD Output
• Parallel BCD mSec Output with Time Quality Card
• Parallel BCD uSec Output with Time Quality Card
• Parallel BCD mSec Output Card
• Oscillator Options: OCXO, Rubidium
• Frequency and Time Deviation Monitor
• Time Interval Event Time Option
• DC Power Supplies for 12, 24, and 48 VDC applications
• Redundant power supplies
• TimeMonitor Software
• Expansion module
See“6: Option Cards” on page 167 for more information. Optional oscillator upgrades provide enhanced
short term stability when locked to a reference source, and improved holdover ‘flywheeling’ when a
reference source is unavailable. See “P7: Oscillators” on page 223
for more information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com