XLi Time & Frequency System 157
XLi-man, Issue 8, 6/17/2008, Rev. H
2
5
1
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
Command Line
To obtain the status of the GPS Receiver, enter:
F119<S>B<N><SEP>S<CR>
For example, enter:
F119 B1 S
XLi responds (example):
F119 B1:
GPS PART NUMBER 87-8028-02
SOFTWARE 230-01510-04v1.17
FPGA 184-8024v1
GPS STATUS UNLOCKED
GPS ANTENNA OK
GPS ACQUISITION STATE: SURVEY POSITION
To obtain the configuration of the GPS receiver, enter the following:
F119<S>B<N><S>C<CR>
where:
For example:
F119 B1 C<CR>
XLi responds:
F119 B1 PRIMARY<CR><LF>
To change the configuration of the GPS receiver as a primary or secondary reference source, enter:
F119<S>B<N><S>C<S><CONFIG><CR>
F = ASCII character F.
119 = function number.
<S> = ASCII space character one or more.
B = ASCII letter to denote Option Bay number follows
<N> = Option Bay Number, 1 through 10.
C = ASCII character denotes reference configuration query
<CR><LF> = line terminator, either a carriage return and line feed for output strings or a carriage return only for
input strings.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
