160 XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
1
where:
An example of setting the frequency of one of the output channels follows:
Sample entry:
F120 B2 1 60000<CR><LF>(sets card #2 channel #1 to 60000 MHZ)
Response:
OK<CR><LF>
An example of setting all 4 channels on a card with one serial string:
Sample entry:
F120 B1 1 100000 2 2000 3 2048 4 16<CR>
(sets board #1 channel #1 to 100000 MPPS, channel #2 to 2000 MPPS, channel #3 to 2048 MPPS,
channel #4 to 16 MPPS).
Response:
OK<CR><LF>
F120 = string representing the Function Number
<SP> = ASCII space character one or more
B = ASCII letter indicating board number follows
<N> = board number, 1 to 10
<SEP> = separator
<C> = channel number, 1 to 4
<FREQ> = 0 to 50000000 (50 MPPS) A value of 0 terminates output to the
port
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
