XLi Time & Frequency System 65
XLi-man, Issue 8, 6/17/2008, Rev. H
2
5
1
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
At each data value prompt, enter the desired address for that data value. A negative sign preceding the
address indicates that the data value is not to be transmitted.
Disabling data transmission is a useful feature if a non-addressable display is connected to the display
port. By placing a minus (-) sign in front of 4 of the 5 data value addresses, only one data value will be
transmitted, thus allowing the user to select a value to be displayed on the non-addressable display.
The UP ARROW or DOWN ARROW key is used to change the sign of the address. The LEFT ARROW
and RIGHT ARROW keys may be used to move the cursor. Prior to accepting the displayed value, if the
originally displayed value was the correct value, pressing the CLR button will restore it. Pressing the
ENTER button accepts the displayed value. The next data value address is then displayed until all five
addresses have been entered. The address range is from 0 to 255. Placing a (+) in front of the address
enables the data for transmission, while placing a (-) in front of the address inhibits the data from being
transmitted.
The settings should be set as follows:
PORT DATA ADDR CONFIG
TIME DEVIATION ADDR +022
PORT DATA ADDR CONFIG
FREQ DEVIATION ADDR +021
PORT DATA ADDR CONFIG
SUYSTEM FREQUENCY ADDR +020
PORT DATA ADDR CONFIG
LOCAL TIME ADDR +024
PORT DATA ADDR CONFIG
SYSTEM TIMEADDR +023
Command Line
The FTM can output the following data once-per-second or on demand:
• Local Time
•Time Deviation
• Frequency Deviation
• System Frequency
•System Time
Additionally, the user can configure which data is included in the once-per-second output.
In the following paragraphs <cr><lf> represents the carriage return and linefeed characters, and single '
and double " quotes are used to delimit character strings. The single ' and double " quotes are for text
clarity and are not to be sent to the FTM F27.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
