76 XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
1
where:
For example, to display the LLA coordinates of the antenna connected to card #2, enter:
F50 B2 LLA<CR>
XLi responds:
F50 B2 N 38d23'51.3" W 122d42'53.2" 58m<CR><LF>
To display the present antenna position using ECEF XYZ coordinates in meters, use the following
format:
F50<S>B<N><SEP>XYZ<CR>
XLi responds using the following format:
F50B<N><S><SIGN><S><MX>m<S><SIGN><S><MY>m<S><SIGN><MZ>m<CR><LF>
F50 = Function 50
<S> = ASCII space character one or more.
B = ASCII letter to denote Option Bay number follows
<N> = Option Bay Number, 1 through 10.
<SEP> = Separator
LLA = LLA mode
<CR> = carriage return character.
<SIGN> = N or S for latitude; E or W for longitude; – for negative altitude and <S> or + for positive altitude.
<DEG> = two-digit degrees for latitude or three-digit degrees for longitude.
d = ASCII character d
<MIN> = two-digit minutes.
' = ASCII character '
<SEC> = two-digit seconds + 1 digit 10ths of seconds.
" = ASCII character "
<ALT> = altitude in meters
<UNITS> = unit of altitude, “m” for meters
<LF> = line feed character.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
