Tait TP9500 - Page 46

Using the channel selector
Thechannelselectorcanbeusedtoeitherselect16channels,orcontinuouslyscrollthroughallavailablechannelsif
thecontinuousselectormodelhasbeenpurchased.
IfthechannelselectoristurnedwhilepressingthePTTkey,thechannelwillchangeafterthePTT
keyisreleased.
Using the keypad
Thisfeatureisonlyavailableforradioswithalphanumerickeys.
Dialingachannelmaybeavailablefromtheradio’sidledisplaybutisalwaysavailablewhileintheChannelsmenu.
1.Dialthenumberassociatedwiththechannelusingthealphanumerickeys.
Todeleteadigitthatyouhavedialedincorrectly,pressClear.
2.PressSelector#,andtheprogrammedchannelisnowshownonthedisplay.
Automatic channel selection
Theradiomaybeconfiguredtochangechannelsautomaticallybasedoncurrentlocation.Theautomaticmodeicon
willbevisibleonthedisplay.
Selectingachannelmanuallyasdescribedabovewillendautomaticmode,andthemanualmodeicon willappear
onthedisplay.
Theradiomaybeconfiguredtouseatimerorafunctionkeytoreturntoautomaticmode.
Other ways of selecting a channel
Thefollowingcontrolsmayalsobeusedtoselectachannel:
•functionkey(seeAccessingFrequentlyUsedMenus)
•leftselectionkey(seeUsingtheleftselectionkeyQuickAccessmenu)
46
Tait International Ltd December 2019