Tait TP9500 - Sending and Receiving Status Messages

2.IntheSet statusmenu,scrollthroughthelistofstatusmessagesuntilthedesiredmessageappears.
3.PressSelect.ThemessageStatus updatedappearsonthedisplay.
Sending and Receiving Status Messages
Astatusmessageissenttoanotherpartytoindicatecurrentactivityorlocation,suchas“enroute”or“atlunch”.Ifthe
radioreceivingthemessagehasbeenprogrammedwiththesamestatusmessages,itwilldecodeanddisplaythe
message.Ifastatusmessageisreceived,themessageisautomaticallyqueued,sincearesponseisnotexpected.
Statusmessagescanalsobeusedtocontrolexternaldevices.
Sending a status message
1.PressMenuandselect Services > Status update.
2.IntheStatus updatemenu,scrollthroughthelistofstatusmessagesuntilthedesiredmessage
appears.
3.Whenamessagehasbeenchosen,pressSelect.
Dependingonhowradioisprogrammed,themessagemaybesentdirectlytoapre-configuredradio
orgroup,ortheuserwillbepresentedwithoptionstoselectadestination.
Thecalldetailsappearonthedisplay.
Receiving a status message
Iftheradioisprogrammedforcallqueuing,incomingstatusmessagesareaddedtothequeue.Formoreinformation,
seeCheckingtheQueue.
PressOptionsandselectwhethertoreply,callordelete.
Theradiomaybeprogrammedtoautomaticallyviewstatusmessagesonreceipt.
Iftheradioisnotprogrammedforcallqueuing,incomingstatusmessagesaredisplayedbriefly.
56
Tait International Ltd December 2019