Need help?Do you have a question about the Tamiya 56371 and is the answer not in the manual?
General| Brand | Tamiya |
|---|---|
| Model | 56371 |
| Category | Motorized Toy Car |
| Language | English |
Details on essential R/C system components and battery requirements for operation.
Lists required Tamiya paints and essential tools for model assembly.
Information on compatibility when installing the Multi-Function Control Unit (MFC).
Emphasizes reading instructions thoroughly and seeking adult help if needed.
Advises ensuring proper ventilation when using paints or adhesives.
Warns about the dangers of small parts and plastic bags for children.
Caution regarding the safe use of modeling tools and blades.
Advises caution with tools and surroundings during assembly.
Explains the function of transmitter, receiver, ESC, and servos in the R/C system.
Detailed steps for verifying transmitter, receiver, and servo function before operation.
Instructions for applying thread lock and grease during assembly.
Important note regarding MFC unit wiring and compatibility.
Instructions for assembling the first part of the chassis frame.
Instructions for assembling the second part of the chassis frame.
Instructions for attaching the first set of cross members.
Guidance on tightening screws to prevent chassis frame warping.
Instructions for attaching the pintle hook with tightening cautions.
Steps for attaching the lift axle, including securing shaft and positioning shackles.
Instructions for installing bump stoppers.
Instructions for installing the shift servo.
Guidance on installing the steering servo with correct mounting hole placement.
Identification of parts for the steering rods.
Steps for attaching the steering rods, including tool usage.
Identification of parts for the front axle assembly.
Specifies the number of dampers required for assembly.
Instructions for attaching the front axle.
Instructions for attaching the uprights, including tool usage.
Further steps for attaching the front axle.
Instructions for attaching the rear leaf springs.
Final steps for attaching the rear leaf springs with cautions.
Identification of differential gear parts and quantity requirements.
Identification of differential housing parts and quantity requirements.
Identification of parts for the rear axle B.
Steps for attaching rear axles, including directional caution and order.
Instructions for attaching rear dampers.
Details on shift rod parts and assembly techniques to prevent damage.
Identification of Gearbox Plate A parts and full screw tightening technique.
Identification of Gear Shaft B parts with cautions on bearings and direction.
Steps for attaching gear shafts, including order, direction, and lubrication.
Instructions for motor installation, including rubber tubing removal and gear meshing.
Instructions for assembling the main gearbox.
Steps for installing the gearbox with specific techniques and cautions.
Instructions for attaching the rear fenders temporarily.
Safety warning regarding sharp edges on rear fender parts.
Instructions for painting the rear fenders.
Steps for assembling and attaching the rear fenders.
Instructions for assembling the first part of the taillights.
Instructions for assembling the second part of the taillights.
Information regarding alternative sticker usage.
Steps for attaching taillights, including temporary mounting.
Guidance on aligning fender tops with other components.
Instructions for attaching the second axle fenders with cautions.
Instructions for assembling the first part of the coupler.
Steps for assembling the coupler, including firm attachment and initial order.
Identification of parts for the coupler shaft.
Instructions for attaching the coupler.
Steps for assembling front fenders, including plating preparation.
Instructions for attaching the R/C deck with wiring and directional notes.
Steps for attaching front fenders, including alignment with other parts.
Step-by-step instructions for attaching the battery box.
Instructions for attaching the exhaust box.
Step-by-step instructions for attaching the side skirts.
Guidance on connecting motor, receiver, and MFC unit cables securely.
Instructions for MFC unit adjustments and managing cables.
Visual guide for MFC unit wiring, cable routing, and component identification.
Refers to MFC manual and notes on unused parts and light cases.
Instructions for using MFC-specific nylon bands for cable management.
Methods for securing cables using bands, tubes, clips, and chassis frame.
Procedure for aligning uprights and ensuring servo neutrality.
Instructions for installing the shift lock mechanism.
Checking the correct engagement of Low, Second, and Top gears.
Details on wheel assembly, tire logo orientation, and front wheel gluing.
Instructions for installing wheels correctly and notes on optional parts.
Instructions for attaching cab quarter panels and painting.
Instructions for assembling the side mirrors.
Explanation of options for roof lamps and grille bars.
Instructions for attaching side mirrors.
Instructions for installing the windshield.
Instructions for assembling the roof front and its optional lighting.
Steps for assembling and installing roof lamps.
Information regarding servo cable extension for MFC compatibility.
Instructions for roof assembly, including part orientation and painting.
Steps for attaching roof lamps, including adhesive tape preparation.
Instructions for visor assembly, including MFC manual reference.
Instructions for attaching the roof section.
Instructions for installing the windshield wipers.
Detailed guide on applying stickers correctly.
Instructions for assembling and installing the dashboard.
Identification of parts for the front grille.
Instructions for attaching the front grille with wiring notes.
Instructions for installing the seats.
Guidance on assembling, painting, and cementing the driver figure.
Steps for preparing the figure, including cutting and final attachment.
Instructions for adjusting antenna pipe length and managing cables.
Covers cab attachment steps, grille bar options, and cable routing.
Instructions for assembling the front bumper and its step order.
Steps for front grille assembly, LED options, and wiring.
Instructions for attaching the front bumper grille with wiring.
Steps for front bumper attachment, including primer and decal application.
Guide for LED wiring, unused LEDs, and component identification.
Overall MFC wiring diagram, cable routing, and manual references.
Instructions for assembling the first part of the cab frame.
Instructions for assembling the second part of the cab frame.
Instructions for assembling the third part of the cab frame.
Instructions for attaching the left side guard.
Instructions for assembling both left and right side guards.
Steps for building the battery holder and routing cables.
Instructions for attaching the battery holder with cable routing.
Instructions for attaching the battery cover.
Instructions for right storage box assembly and optional part preparation.
Specifies the number of spotlights required for assembly.
Instructions for attaching air tanks, including order and primer application.
Steps for attaching the platform, including quantity and direction.
Instructions for attaching the receptacle rack.
Instructions for attaching the heavy equipment rack.
Instructions for installing the battery pack.
Guidance on managing and securing battery cables.
Refers to page 36 for detailed sticker application instructions.
Specific technique for applying larger stickers to the model.
General guidance on positioning and applying stickers.
Explanation of the second axle's function and how to adjust its position.
Options for connecting a pole-trailer using kit or separate parts.
Notes on kit parts and compatibility with optional motorized support legs.
Identification of the bag containing support leg parts.
Rules for safe R/C operation including frequency, environment, and general practices.
Step-by-step guide for operating the R/C model safely.
Exercises for improving driving skills like oval and figure-eight courses.
Guide to identifying and resolving common problems with the R/C model.
A list of part codes for ordering replacement components.
Explanation of symbols indicating part quantities required for assembly.
Information on ordering parts via dealers or Tamiya Customer Service, including payment methods.
A list of available parts with their corresponding prices and part codes.
Safety rules for towing loaded trailers, including gear selection and battery care.
Instructions for managing long antenna cables to prevent interference.
Guidance on safely lifting the model and adjusting support legs.
To Next Page