Tascam DR-05 - Playback does not work.; Recording does not work.

TASCAM DR-05 103
Is the OUTPUT LEVEL setting of the unit •
minimized?
Recording does not work. ª
If you are using an external device, check the •
connection again.
Check the input settings again. •
Confirm that the recording level is not too •
low.
Confirm that the microSD card is not full.•
Confirm that the number of files has not •
reached the maximum that the unit can
handle.
The recording level is low. ª
Confirm that the input level setting is not too •
low.
Confirm that the output level of a connected •
external device is not too low.
The sound I am trying to record ª
sounds distorted.
Confirm that the input level setting for •
recording (REC LEVEL) is not too high.
The playback sounds unnatural. ª
Confirm that the playback speed is not being •
adjusted.
Confirm that the playback equalizer is not •
enabled.
Confirm that the level alignment function is •
not enabled.
I cannot erase a le. ª
Confirm that you are not trying to erase a file •
that has been copied from a computer after
being write-protected.
This unit’s les do not appear on the ª
computer.
Confirm that the unit is connected to the •
computer using its USB port.
Confirm that USB hubs are not used.•
Confirm that the unit is not recording or in •
recording standby mode.
12–Troubleshooting