28 TASCAM DR-05
Start -Up Screen
Home Screen
CAUTION
When the unit is started up for the first time (or when
the built-in clock is reset after being left unused without
batteries), the DATE/TIME screen appears before the start-up
screen to adjust the date and time.
Press the  or ¯ button to move the cursor
(highlighted area), and use the + or - button to change
values.
Press the Á button to fix the settings.
The start-up screen is displayed, and then the Home Screen
appears after the unit has started up.
Date/time adjustment may be skipped by pressing the Á
button, and made later. (See “Setting the date and time” on
page 29.)
Shutting down
Press and hold the (HOME) [ª] button until
LINEAR PCM RECORDER
appears on the display.
The power turns o after the unit completes its
shutdown process.
3–Preparation
To Next Page
Loading...
