34 TASCAM DR-05
In addition to using the built-in microphone, you
can record using an external microphone or record
the output signal from a mixer or other audio
source. You can select among MP3 (44.1/48 kHz,
32–320 kbps) and WAV (44.1/48/96 kHz, 16/24-bit)
audio recording formats.
As the unit is compatible with the BWF format for
WAV les, marks added to the WAV les during
recording are available when playing back the les
using a BWF compliant software, etc.
With this unit, you can mix and record a sound
input through the built-in mic or one of the input
jack with an audio le that is played back using the
overdubbing function.
Selecting file format/sampling
frequency/type, and maximum
file size
Select the audio le type that you want to record
before you start recording.
1 Press the MENU button to open the
MENU
Screen.
2 Use the + or − button to select
REC
SETTING
, and press the Á button.
REC
SETTING
screen appears.
3 Use the + or − button to select
FORMAT
, and
press the ¯ or Á button.
Set the file format with the + or − button to
from the following:
WAV: 16bit (default), WAV 24bit
MP3: 32kbps, 64kbps, 96kbps, 128kbps,
192kbps, 256kbps, 320kbps
4–Recording
To Next Page
Loading...
