EasyManua.ls Logo

Tascam DR-05 - Creating and Changeover to a New File During Continued Recording (Track Incrementing); Manual Track Incrementation During Recording

Tascam DR-05
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TASCAM DR-05 53
NOTE
To avoid accidental recording of the noise from pressing the
RECORD [º] button, the start of recording is delayed by 0.3
second (fixed) after the RECORD [º] button is pressed. (REC
DELAY)
CAUTION
Noise may occur when recording with a microphone if the unit
is too close to the AC adaptor. In such a case, keep sufficient
distance between the AC adaptor and the unit.
Creating and changeover to a new
file during continued recording
(Track incrementing)
You can manually or automatically split
a recording by creating a new le. (Track
incrementing)
Manual track incrementation during
recording
You can manually split a recording by creating a
new le.
1 Press the QUICK button while recording.
NOTE
When new files are created, incremental numbers are added
to the end of each file name.
CAUTION
A new file cannot be created if the total number of files •
and folders would exceed 5000.
Files shorter than two seconds cannot be created. •
If the name of a newly created file would be the same as •
that of an existing file, the number will be incremented
until the new file has a unique name.
4–Recording

Table of Contents

Other manuals for Tascam DR-05

Related product manuals