Removing the card
1 Open the microSD slot cover on the right
side panel.
2 Press the microSD card in gently and then
release it to allow it to come out.
CAUTION
Do not remove the microSD card from the unit when it is •
connected to a computer by USB.
microSD cards that meet microSD or microSDHC •
standards can be used with this unit.
A list of microSD cards that have been confirmed to •
work with this unit can be found on our website (http://
tascam.com).
Preparing a microSD card for use
In order to use a microSD card in this unit, you
must format it rst.
1 Confirm that a microSD card is installed
and turn the power ON.
2 The following message appears when a
new card or a card formatted for use with
another device is installed in the unit.
3 Press the Á button to start formatting.
4 When formatting ends, the Home Screen
opens.
You can also reformat the card in this unit
at any time. (See “System Settings and
Formatting” on page 94.)
3–Preparation
To Next Page
Loading...
