Teac TD-9000T User Manual

3
Introduction
Using SD cards
Avoid using SD cards with adapters for microSD cards and
miniSD cards.
Media types
Compatible media
SD/SDHC cards
Recording capacity
2GB – 32GB
Recommended speed class
Class10
Media that has been verified to operate
with this system
This system uses SD/SDHC cards for recording.
We provide a list of SD/SDHC cards that we have verified
for operation with this system on our Information Products
Division load cell website.
https://loadcell.jp/en/
You can also contact us. (For contact information, see the last
page.)
o In this manual, SD/SDHC cards are referred to as “SD cards”.
o Prepare recording media that has been formatted by the
TD-9000T (page68).
o Do not use a computer to delete, move or otherwise alter
data recorded on an SD card. Doing so could cause the
TD-9000T to become unable to properly record data.
Insertion and removal
Always insert and remove SD cards when they are not being
accessed.
Never remove an SD card when the unit is operating (includ-
ing when recording). Doing so could cause recording to fail
or recorded data to be lost, for example. Moreover, doing so
could also damage the unit.
Inserting SD cards
1 Open the recording media slot cover on the bot-
tom of the front of the unit.
2 Push the SD card all the way into the SD card slot
on the right side of the opening.
o The SD card has a front end that must be inserted
first. Insert the card with the correct orientation.
Forcing a card into the card slot could damage this
unit.
o A clicking sound can be heard when the card is
pushed all the way in.
3 Close the recording media slot cover.
Removing SD cards
1 Open the recording media slot cover.
2 Push the SD card in gently.
The SD card will come out part way.
3 Pull the SD card out by hand.
4 Close the recording media slot cover.
SD card write-protection switches
SD cards have write-protection switches.
Locked
Writing prohibited
Write-protection switch
Writing data can be prohibited by moving
the switch to the LOCK position.
o Slide the write-protection switch to
one direction completely.
o To use an SD card for recording or to erase recording data
on it or format it, unlock the write-protection.
ATTENTION
When using an SD card with a capacity of 2 GB, FAT file sys-
tem restrictions limit the number of files to 127. Even when
using a card with a larger capacity, we recommend keeping a
maximum of about 1000 data files because processing speed
becomes slower as the number of files increases.

Teac TD-9000T Specifications

General

Brand	Teac
Model	TD-9000T
Category	Measuring Instruments
Language	English