Teac TD-9000T User Manual

89
7-2. Setting value list
7-2-1. SETTINGS
Item Setting Format Default value Setting range/options
LOCK STATUS
CALIBRATION LOCK Selection UNLOCK UNLOCK, LOCK
WORK LOCK Selection UNLOCK UNLOCK, LOCK
ALL LOCK Selection UNLOCK UNLOCK, LOCK, PASSWORD LOCK
LANGUAGE Selection Japanese Japanese, English, Chinese, Korean
7-2-2. CALIB. & SYSTEM
Item Setting Format Default value Setting range/options
INTERNAL MEMORY
SAVING Selection AUTO SAVE NO, AUTO SAVE, SAVE ON ERROR
OVERWRITING Selection ALLOW ALLOW, FORBID
DELETE ALL Selection EXECUTE
OK/NG COUNTERS Selection
RESET ALL, RESET ONLY OK, RESET
ONLY NG
7-2-3. SYSTEM
Item Setting Format Default value Setting range/options
DEVICE NUMBER Input 0000 0000–9999
BEEP Selection KEY OFF, KEY, KEY+JUDGE
LCD BRIGHTNESS Selection LEVEL 3 LEVEL 1–4
BACKLIGHT TIME Input 0 0–255sec
EXT. START/STOP Selection EDGE EDGE, LEVEL
DATE Input 2000–2099 (year)
Date format Selection yyyy-mm-dd
yyyy-mm-dd, dd-mm-yyyy,
mm-dd-yyyy
RESET TO FACTORY SETTINGS Selection
SD CARD
AUTO SAVE Selection NO NO, AUTO SAVE, SAVE ON ERROR
Format Selection EXECUTE
EXPORT THE SETTINGS Selection EXECUTE
IMPORT THE SETTINGS Selection EXECUTE
SERIAL COMM.
PORT SELECTION Selection USB USB, D-SUB
COMMUNICATION
MODE
Selection TD FORMAT
TD FORMAT, TD FORMAT (BCC),
CONTINUOUS TX
BAUD RATE Selection 115200 9600, 19200, 38400, 57600, 115200
BIT LENGTH Selection 8bit 8bit, 7bit
PARITY BIT Selection NO NO, ODD, EVEN
STOP BIT Selection 1bit 1bit, 2bit
DELIMITER Selection CR + LF CR + LF, CR
7. Setting lists

Teac TD-9000T Specifications

General

Brand	Teac
Model	TD-9000T
Category	Measuring Instruments
Language	English