6. TERMINAL FILE PROGRAMMING
EO3-11106
6.25 PLU Preset-Code Key Setting
6-127
(continued from the previous page)
Operation LCD Display Remarks
Depress the [↓] key.
The cursor is moved on to “2 PLU”.
Depress the [2] or [Enter] key.
“2 PLU” is selected.
Depress the [↓] key twice.
The cursor is moved on to “3 ASSIGN TO
KEYBOARD”.
Depress the [3] or [Enter] key.
“3 ASSIGN TO KEYBOARD” is selected.
Depress the [1] or [Enter] key.
“1 PK-2” is selected.
Input 1111, then depress the [Enter]
key.
(PLU Code 1111 is set.)
Directly depress a key on the PK-2
keyboard where PLU Code 1111 is to
be assigned.
The [End] key depression allows the
ECR to end this setting.
A long receipt is issued and the display
returns to Main Menu screen.
To Next Page
Loading...
