6. TERMINAL FILE PROGRAMMING
EO3-11106
6.33 Hourly Range Table Setting
6-143
3) Example
To set the following hourly range table:
TIME01 until 8:00*
TIME02 8:00 to 12:00
TIME03 12:00 to 15:00
TIME04 15:00 to 19:00
*(The first term is automatically continued from 19:00 of the preceding day.)
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
four times.
The cursor is moved on to “5 BASIC”.
Depress the [5] or [Enter] key.
“5 BASIC” is selected.
Depress the [↓] key three times.
The cursor is moved on to “4 HOURLY
RANGE”.
Depress the [4] or [Enter] key.
“4 HOURLY RANGE” is selected.
Depress the [1] or [Enter] key.
“1 SETTING” is selected.
Input 0800, then depress the [Enter]
key.
(TIME01 is set with 8:00.)
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
Input 1200, then depress the [Enter]
key.
(TIME02 is set with 12:00.)
(continued on the next page)
To Next Page
Loading...
