TEC MA-600 Series - Page 52

6. TERMINAL FILE PROGRAMMING EO3-11106
6.5 System Option Programming
6-32
System Option Table
Standard Bit Set (auto-set by RAM Clear)
ADDRESS NO. CONTENTS
0
21 TAX CONTROL II
BIT
NO.
ITEM SELECTIVE STATUS
STANDARD
STATUS
REMARKS
RESET
NON-PRINT
*
1
Multiple Taxes Separate
Print on Receipt
SET
SEPARATE PRINT
RESET
NON-PRINT
*
2
Tax Total Amount on
Receipt
SET
PRINT
When Add-on Tax
feature is selected at
Bit No. 5, taxes are
always printed.
RESET
NON-PRINT
*
3
Taxable Total Print on
Receipt
SET
PRINT
NOTE 1 below
RESET
(Price x Rate) ÷ (1 + Rate)
*
4
VAT Calculation Method
(VAT = )
SET
(Price x Rate)
This bit status selection
is effective only when
VAT feature has been
selected.
RESET
VAT
*
5
Tax Type:
VAT or Add-on Tax
SET
ADD-ON TAX
NOTE 2 below
RESET
NON-PRINT
*
6
NET VAT Total
Separate Print on
Receipt (NOTE 3)
SET
PRINT
This bit status selection
is effective only when
VAT feature has been
selected.
RESET
*
7
-- vacant --
SET
RESET
NON-PRINT
*
8
NET Total Print on
Receipt (NOTE 4)
SET
PRINT
This bit status selection
is effective only when
VAT feature has been
selected.
NOTE 1: Whether the taxable total is printed on the receipt is selected.
SET: It is printed individually.
RESET: It is not printed.
NOTE 2: When the Add-on Tax feature is selected:
1) The [TX1/M] to [TX8/M] keys can reverse the respective Tax status of Departments and PLUs. Reversing the Tax status of
[% +], [% -], and [-] is also possible. (Neither the [TX1/M] to [TX7/M], nor [TX8/M] keys can be used when the VAT feature is
selected.)
2) When a taxable item (subject to any of Tax 1 to Tax 8) is entered in a sale, the symbol “T” is printed to the right of the item
amount.
NOTE 3: Whether the NET VAT total of each VAT is printed on the receipt is selected.
SET: It is printed.
RESET: It is not printed.
NOTE 4: Whether the NET total (amount total not including VAT total) is printed on the receipt is selected.
SET: It is printed.
RESET: It is not printed.