6. TERMINAL FILE PROGRAMMING
EO3-11106
6.7 Footer Message Programming
6-54
(continued from the previous page)
Operation LCD Display Remarks
The [Enter] key depression allows the
ECR to enter the 2nd line message
input mode. (The [C] key depression
clears the message already
programmed.) The 2nd line message
is input.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[→] [→] [→] [→] [→] [→] [→] [→] [→] [→]
[→] [→] [→] [→] [→] [→] [C] [A/a] [a] [l] [l]
[→] [a] [g] [a] [i] [n] [Enter]
The [Enter] key depression results in
that the input message is entered and
displayed.
When the [Enter] key is depressed, the
message programmed in the 2nd line is
printed.
The [End] key depression allows the
ECR to end this programming.
A long receipt is issued and the display
returns to Main Menu screen.
NOTE: In the above example, characters except for alphabets are
entered using the character code entry method.
Open 8:00am to 7:00pm
Closed: every Wednesday
31-10-2005 MON #0
FOOTER NAME
1
Thank You
2
Call again
0004 13:13TM
To Next Page
Loading...
